Product was successfully added to your shopping cart.

You have no items in your shopping cart.

Tiger Select Benzene & Total Aromatic Compound (TAC) PID

Product SKU: PTXSLBME-0512

Quick Overview

Benzene Specific PID

Availability: In stock



ION Science Tiger Select Benzene Specific PID PTXSLBME-0512 

Benzene & Total Aromatic Compound (TAC) detector.

Rapidly detects benzene and total aromatic compounds (TACs) providing the most accurate, reliable data available.

The Tiger Select is revolutionary hand-held gas detector with two mode operation for the rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data you can count on.

Utilizing the high output Ion Science 10.0eV detection system, a reading for Total Aromatic Compounds (TACs) is seen immediately on start-up. Should aromatics be detected, a Draeger benzene prefilter tube can be easily attached to ensure rapid detection and selective measurement of benzene. 

Throughout the measurement process, Tiger Select continues to display real time data, ensuring the final reading represents the full value of actual benzene present. Benzene concentrations are displayed down to ppb levels, giving you the most accurate, reliable data you can count on. 

Tiger Select is capable of providing 15 minute STELs and 8 hour TWAs for TACs. A 10.6 eV lamp can easily be installed for the detection of a wide range of TVOCs.

In addition, the unique MiniPID VOC sensor incorporates both Anti-contamination technology and Fence Electrode technology for extended operation in difficult working environments.

The Tiger Select benzene and total aromatic compound detector can also be used in standard Tiger operational mode without the use of a benzene pre-filter tube to deliver active indications of VOCs, including benzene at concentrations as low as 1 ppb benzene equivalent.

Key Benefits

  • Fast to detect Total Aromatic Compounds (TACs)
  • Detects benzene in other compounds with selective Draeger Benzene pre-filter tube
  • Also detects benzene without the need for a specific tube in areas of benzene gas only
  • Detects down to ppb levels
  • Continuous readings shown on display until max level is reached
  • Independently verified as best performing PID technology

Key Features

  • Large, clear backlit display and keypad
  • Easy to operate even when wearing thick gloves
  • Lightweight enabling easy one-handed operation


  • Rugged design to withstand the harshest environments
  • Backlight responds to ambient light conditions
  • Battery life up to 24 hours

Tiger PID includes-

Tiger Select Basic Instrument with 10.0 eV Lamp (incl. Li-ion Rechargeable Battery, Battery Charger & Outlet Adaptor, Rubber Boot, Explorer Case, USB Memory Stick, Draeger Benzene Pre-Filter Tubes & Tube Opener, Pellet Pack PPB (use only in non-Select applications), Tiger Select Manual & Quick Start Guide, Carbon Filter Assembly & Adaptor, PTFE Filter Discs, Removable Tool for MiniPID Stack, Sample Cleaning Compound, Lanyard, Tiger Select Calibration Connector & Adaptor, Sensor Seal – Coated, and O-ring)

Additional Information

10 ppb or 0.033 mg/m3 benzene

Maximum Reading
40 ppm or 130 mg/m3  benzene in tube mode
0 - 20,000 ppm in TAC mode (gas dependant)

±10% display reading ± one digit benzene    

± 5% to 40 ppm benzene

Response Time
120 seconds. Progressive indication of benzene breakthrough is displayed in real time

Intrinsically Safe Approvals
ATEX II 1G Ex ia IIC T4 Ga (- 15 0C ≤Ta ≤+45 0C), IECEx and CUL
US and Canadian approved

Battery Life

Li-ion: life up to 24 hours, charge time 6.5 hours
Alkaline: 3 x AA, up to 8.5 hours life

PID Lamps
Kr PID lamp with 10.0 eV filter pellet

Data Logging
> 120,000 data log points including date and time stamp

Direct USB 1.1

2 and 3 point calibration (Via calibration kit accessory?

Flashing LED’s Amber (low alarm) Red (high alarm)
Sounder 95 dBA at 300mm (12”) Vibration on alarm
Pre-programmed TWA and STEL*

Flow Rate
220 ml/min (150 cc/min flow alarm)

Operating: -20 to 60 0C, -4 to 140 0F (non Intrinsically Safe)
Humidity: 0-99% RH (non condensing)

Designed to IP65 (heavy rain)
EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A

Weight & Dimensions
Instrument (probe fitted, no tube attached)
Length: 465 x Height: 89 x Depth: 61 mm (18.3 x 3.5 x 2.4”)
Standard case
Packed weight: 5 kg (176 oz)